3528SMD 60LED/m Constant Current 4.8W LED Strip Ultra Long Connection Without brightness Drop

60 Current 5W SMD 3528 RGB LED Strip Long Connection Without Drop

3528 60LED CC is 5m long flexible strip with 3528SMD 300LED as source, 12mm white PCB (2Oz) in 12V/24V,6 whites (2200-6500K) and colors of R/G/B/Y/A/O/P/PP options, from IP20 to IP67 rated with 3M or clips mounted easily

Product advantages:

• Color Consistency, only one bin
• High Efficacy, 90-165lm/w
• High CRI, 80+,90+,95+
• Color purity: we use quality chip, phosphor golden wires and copper holder, make the SDCM<4
• Long Lifespan: >35000 Hrs
• No dark and uninterrupted Led strip
• High brightness, low decay, low power consumption, LM-80 Tested
• Be able to give soul space, and increase the dynamics of the space, making the space brighter.

Application area:

• Cove lighting
• Architectural lights for canopy, archway
• Backlight or edge lighting for signage
• DIY lights for home use
• Path and contour marking
• Decorative lights for holiday, event, show, exhibition, hotel

Technical details:

Dimension:

Installation:

Packing details:

Using Notice:

• The strip itself and all its components may not be mechanically stressed.
• Assembly must not damage or destroy conducting paths on the circuit board.
• Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
• Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
• Parallel connection is highly recommended as safe electrical operation mode.
• Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
• Please ensure that the power supply is of adapters power to operate the total load.
• When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
• Pay attention to standard ESD precautions when installing the strip.
• Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
• Caution needs to be taken while doing the connection after cutting the strip. Only authorized professionals can do the work to enable it waterproof in wet locations.