5050 120 LED/m Constant Current 600 SMD LED Strip Lights Decorative 24 Volt 5M Ultra Long 20m/roll

Decorative 24 Volt 5M 5050 RGB 300 SMD LED Strip Lights 32W 120 LED / Meter

Product advantages:

• Color Consistency, only one bin
• High Efficacy, 90-165lm/w
• High CRI, 80+,90+,95+
• Color purity: we use quality chip, phosphor golden wires and copper holder, make the SDCM<4
• Long Lifespan: >35000 Hrs
• No dark and uninterrupted Led strip
• High brightness, low decay, low power consumption, LM-80 Tested
• Be able to give soul space, and increase the dynamics of the space, making the space brighter.

Application area:

• Backlight or edge lighting for signage
• Cove lighting
• Architectural lights for canopy, archway
• DIY lights for home use
• Path and contour marking
• Decorative lights for house, event, show, exhibition, hotel

Technical details:

Dimension:

Installation:

Packing details:

Using Notice:

• The strip itself and all its components may not be mechanically stressed.
• Assembly must not damage or destroy conducting paths on the circuit board.
• Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.
• Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.
• Parallel connection is highly recommended as safe electrical operation mode.
• Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.
• Please ensure that the power supply is of adapters power to operate the total load.
• When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.
• Pay attention to standard ESD precautions when installing the strip.
• Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
• Caution needs to be taken while doing the connection after cutting the strip. Only authorized professionals can do the work to enable it waterproof in wet locations.